Serving Plymouth & all of Plymouth County
CALL (508) 503-6186
Kingston, MA

Radon Mitigation in Kingston, MA

Kingston has the second-highest share of elevated radon results in this service area. Of 961 tests reported between 2015 and 2024, 233 came back at or above 4.0 pCi/L, and the town's highest recorded result was 121.7 pCi/L.

Kingston also turns over real estate steadily, which means most of the testing here happens on a deadline. That changes how the test gets run.

What do Kingston radon tests actually come back at?

Massachusetts DPH publishes every radon test result reported in the state by town. Here is what 961 Kingston tests from 2015 through 2024 look like.

MeasureKingston, MAWhat it means
Tests on record, 2015-2024961The sample this table is built on
Median result2.2 pCi/LHalf of Kingston homes tested came in below this
Geometric mean2.3 pCi/LThe typical result, with outliers damped
Tests at or above 4.0 pCi/L233 (24.2%)EPA says fix the house at this level
Tests between 2.0 and 4.030.2%EPA says consider fixing
Tests below 2.045.6%No action recommended
Highest single result on record121.7 pCi/LOne house, not the town, but it was somebody's house
Tests per 1,000 occupied homes180.6How thoroughly the town has actually been checked

Source: Massachusetts Department of Public Health radon testing data, town-level export, 2015-2024.

How fast can a Kingston test run inside an inspection window?

Colonials near the center of town and newer subdivisions toward the bay sit on the same glacial till, and the test result tracks the foundation more than the build year. What separates Kingston work from the rest of the county is timing. Most calls come from a buyer, a seller or an agent with a date on the calendar.

We place continuous monitors that log hourly rather than charcoal canisters that mail to a lab. The monitor records closed-house compliance alongside the reading, so a seller cannot argue the windows were open and a buyer cannot argue they were not. Results land in 48 hours in a written report your attorney can attach.

When a Kingston test comes back high mid-deal, mitigation usually runs one day, and the retest that proves the number dropped runs another 48 hours. Four days from bad news to a clean document, if the call comes early.

What EPA radon zone is Kingston in?

The EPA Map of Radon Zones assigns Plymouth County to Zone 2, which predicts an average indoor screening level between 2.0 and 4.0 pCi/L. Barnstable, Bristol and Norfolk counties carry the same designation. Worcester, Middlesex and Essex are Zone 1.

The EPA prints a warning on the same map: it should not be used to decide whether an individual home gets tested, and all homes should be tested regardless of zone. The Kingston numbers in the table above show why. A county-wide prediction cannot tell you what is under one address.

What certification and permits does a Kingston job need?

Massachusetts does not license radon contractors. The state's own guidance points homeowners at professionals certified by NRPP or NRSB, and those two certifications are the only credential worth asking about. Ask for the number, not the logo.

An active system puts a fan in the vent stack, and wiring that fan is electrical work, so the Kingston wiring inspector is normally the one permit stop on a mitigation job. We pull it. Systems that vent above the roofline and discharge away from windows meet the EPA protocol the inspector is checking against.

Asked constantly

Radon questions from Kingston homeowners

Is radon a problem in Kingston, MA?

State testing data says yes for a meaningful share of houses. Of 961 Kingston tests on record from 2015 through 2024, 24.2% came back at or above the EPA's 4.0 pCi/L action level, and another 30.2% landed between 2.0 and 4.0. The town median is 2.2 pCi/L.

How much does radon mitigation cost in Kingston?

Most single-family systems in this county run $1,200 to $2,500 installed, with a post-mitigation retest included. The price turns on foundation type and how many suction points the slab needs, which is why we quote in writing after seeing the house.

How long does a radon test take in Kingston?

A short-term test needs a minimum of 48 hours under closed-house conditions. We use continuous monitors that log hourly, so a test placed Monday is reported Wednesday. Real estate deadlines get priority placement.

Do I need a radon test before buying a house in Kingston?

Nothing in Massachusetts law requires one, but radon testing is standard practice in home-sale inspections here, and buyers routinely ask for mitigation or a credit when a result comes back high. Testing inside the inspection window costs less than renegotiating after you own it.

Can a radon test be done fast enough for a Kingston closing?

Yes. The physical minimum is 48 hours of closed-house conditions, and we place monitors the day you call when the schedule allows. Mitigation adds about one working day, plus another 48 hours for the retest. Build in four to five days if you want a clean post-mitigation number before the walkthrough.

One call covers testing, mitigation, well-water treatment and system repair anywhere in Kingston and the rest of Plymouth County. Written quote first, retest after.

Get a Kingston radon number you can trust.

Sources: Massachusetts Department of Public Health radon testing data 2015-2024; EPA Map of Radon Zones, Massachusetts.

Plymouth Radon

Radon Mitigation for Plymouth and Plymouth County. Test it. Fix it. Prove it's fixed.

(508) 503-6186

Services

Radon Mitigation System InstallationRadon TestingReal Estate Radon TestingRadon in Well Water TreatmentNew Construction Radon SystemsRadon System Repair & Fan Replacement

Area

PlymouthKingstonDuxburyCarverPlymptonHalifaxMarshfieldPembrokeMiddleboroughWareham

Company

AboutContactPrivacyTerms
☎ Call NowGet a Quote